CEBORA INVERTER MMA – POWER ROD 131
The POWER ROD 131 MMA inverter power source (art. 256) is suitable for MMA welding of all rutile basic electrodes AWS 7018, in stainless steel and aluminium.
The power source is distinguished by a shockproof plastic casing which has made it possible to reduce weight to just 4.5 kg, along with relevant dimensions.
This is a single-phase inverter power source (230V) for MMA and TIG DC welding (with Cebora Lift ignition, using the TIG Cebora T150 torch, art. 1567.01). It can weld electrodes of up to Ø 3.25 and has a duty cycle of 130A at 30% (which becomes 100A at 100%).
It is ideal for maintenance and repair works thanks to its lightweight and shockproof plastic casing which makes it suitable for use in many different operating conditions. It features a shoulder strap for easier transport.
The compliance with EN 61000-3-12 brings substantial energy saving and a wide supply voltage tolerance (+15% / -20%).
The power source can be powered by motor generators of adequate power (Min. 6 KVA).
|230V 50/60 Hz
+ 15% / -20%
|Single phase input|
|16 A||Fuse rating (slow blow)|
|4,0 KVA 30%
3,3 KVA 60%
3,0 KVA 100%
|10A ÷ 130A||Current adjustment range|
|Duty Cycle (10 min.40°C)
According to IEC 60974.1
|Ø 1,5 ÷ 3,2||Electrodes that can be used|
|IP 23 S||Protection class|
|256||MMA and TIG inverter type D.C. welding power source.
Cebora lift ignition
Antishock plastic housing with shoulder strap.Comes without torch and welding cables.
Complies with EN 61000-3-12.
|1281.04||Accessories set for electrode welding:
electrode holder (5 m. -16mm2),
work return lead (3 m – 16 mm2),
mask with glasses, chipping hammer and steel brush.
|1567.01||“CEBORA T 150” torch 4 m. length.|