Oops! It appears that you have disabled your Javascript. In order for you to see this page as it is meant to appear, we ask that you please re-enable your Javascript!

MAGNAFLUX FLUORESCENT Magnetic Particle Inspection

Magnaglo® Fluorescent Particle Inspection Products

Magnaglo® is the preferred fluorescent magnetic particle inspection method used for the detection of fine surface and slightly subsurface discontinuities in ferrous materials.

Magnaglo® fluorescent particles are finely controlled to ensure maximum sensitivity and to encapsulate and maintain their fluorescent pigmentation for the production of superior indications and to expand bath life.

A full family of Magnaglo® NDT certified products, accessories and equipment backed by 80 years of industry experience is available to help improve and expand your magnetic particle testing applications.

Fluorescent Wet Method Particles

Magnaglo® 14A Fluorescent Magnetic Powder

Magnaglo® 14A is intended for use in high sensitivity, wet method magnetic particle inspection and may be suspended in either a petroleum-based vehicle (oil) such as Carrier II or water based vehicle.

Specifications Compliance:

ASTM E 1444, ASME B&PV Code, Sec. V, NAVSEA 250-1500-1, ASTM E-709 (E-138), MIL-STD-271, AMS-3044, Cummins IS-16048-13, MIL-STD 2132, Boeing PS 21201, British Std. B.S. 4069

Part Number and Container Size:

  • 01-0130-71: 1 lb. Jar, Case of 6
  • 01-0130-75: 20 lb. Plastic Pail

Applications: Magnaglo® 14A is used to locate fine surface and slightly subsurface discontinuities such as: inclusions, seams, shrink cracks, tears, laps, flakes, welding defects, grinding cracks, quenching cracks and fatigue cracks.

14A Powder

Magnaglo® 14AM Prepared Oil Bath

14AM is a fluorescent prepared bath of 14A powder mixed with Carrier II (a high flash point petroleum vehicle). Ready to use without measuring and mixing.

Specifications Compliance:

ASTM E 1444, ASTM E-709 (E-138), Cummins IS-16048-13, MIL-STD 2132, Boeing PS 21201, British Std. B.S. 4069, DOD-F-87935, AMS-3045, AMS-3046 (aerosol package only)

Part Number and Container Size:

  • 01-0145-78: Case of 16 fl. oz. Aerosol Cans (12)
  • 01-0145-40: 5 Gallon Pail

Applications: Magnaglo® 14AM is used to locate fine surface and slightly subsurface discontinuities such as: inclusions, seams, shrink cracks, tears, laps, flakes, welding defects, grinding cracks, quenching cracks and fatigue cracks.

Magnaglo® 14A Aqua-GloTM

Magnaglo® 14A Aqua-GloTM is a prepared liquid solution of 14A Fluorescent Powder, water, conditioning agents, corrosion inhibitors and carbon dioxide propellant.

Magnaglo® 14A Aqua-GloTM is designed to offer the benefits of a water bath in a convenient ready to use aerosol form. Ideally suited for applications where portability is required, and flammability is a concern.

Specifications Compliance:

ASTM E 1444, ASTM E-709, NAVSEA 250-1500-1, ASME

Part Number and Container Size:

  • 01-1725-38: Case of 265 gram Aerosol Cans (12)

Applications: Magnaglo® 14A Aqua-GloTM is used to locate fine surface and slightly subsurface discontinuities such as: inclusions, seams, shrink cracks, tears, laps, flakes, welding defects, grinding cracks, quenching cracks and fatigue cracks.

14A Aqua Glo Spray

Magnaglo® 14A Redi-BathTM

Magnaglo® 14A Redi-BathTM is a prepared liquid concentrate of 14A Fluorescent Powder, wetting agents, anti-foaming agents and long lasting rust inhibitors.

Specifications Compliance:

ASTM E 1444, ASTM E-709, NAVSEA 250-1500-1, MIL-STD-271, MIL-STD-2132, ASME B & PV Code, Sec. V

Part Number and Container Size:

  • 01-9130-35 : Cs. of 4 – 1 Gallon Containers
  • 01-9130-41: Cs of 6 – 27 oz. Container

 

Applications: Magnaglo® 14A Redi-BathTM is used to locate fine surface and slightly subsurface discontinuities such as: inclusions, seams, shrink cracks, tears, laps, flakes, welding defects, grinding cracks, quenching cracks and fatigue cracks.

14A Redi-Bath

Magnaglo® 20B

Magnaglo® 20B is a dry mix formula of 14A Fluorescent Powder and WA-2B water conditioner containing wetting agents and corrosion inhibitors designed to be added to a water bath.

Specifications Compliance: 

ASTM E 1444, ASTM E-709 (E-138), NAVSEA 250-1500-1, MIL-STD-271, MIL-STD-2132, ASME B & PV Code, Sec. V

Part Number and Container Size:

  • 01-0179-71: 1 lb. Container, Case of 6
  • 01-0179-70: 15 lb. Container
  • 01-0179-84: 30 lb. Pail

Applications: Magnaglo® 20B is used to locate fine surface and slightly subsurface discontinuities such as: inclusions, seams, shrink cracks, tears, laps, flakes, welding defects, grinding cracks, quenching cracks and fatigue cracks.

Magnaglo® MG-3410

Magnaglo® MG-3410 is a dry, free flowing, green magnetic powder composed of MagnaGlo MG-410 particles and wetting agents.

Magnaglo® MG-3410 is used with water as the suspension vehicle and fluoresces green under black light (wavelength of 365 nanometers).

MG-3410 magnetic powder contains conditioners which improve magnetic particle suspension, mobility and wetting of the test part surface. No additional wetting or conditioning agents are required when MG-3410 is used.

Part Number and Container Size:

  • 01-0199-84: 30 lb. Container

Applications:  MG-3410 is used in inspection for small and large defects in steel billets, tube rounds and large castings.

Magnaglo® MG-2410

Magnaglo® MG-2410 is green fluorescent magnetic powder blended with water condition. Its bright green fluorescent color contrasts with the purple background of metal surfaces when viewed under black light in a darkened area, although a totally darkened inspection area is not required due to MG-2410’s intense brightness.

Magnaglo® MG-2410 is used in wet method magnetic particle testing when water is employed as the bath vehicle.

MG-2410 magnetic powder contains conditioners which improve magnetic particle suspension, mobility and wetting of the test part surface. No additional wetting or conditioning agents are required when MG-2410 is used.

Part Number and Container Size:

  • 01-0195-73: 2 lb. Jar, Case of 6
  • 01-0195-70: 30 lb. Container

Magnaglo® MG-410 Wet Method Fluorescent Magnetic Powder

Magnaglo® MG-410 Wet Method Fluorescent Magnetic Powder is a dry, free flowing magnetic powder that fluoresces bright yellow-green under black light (wavelength of 365 nanometers).

Magnaglo® MG-410’s bright fluorescent yellow-green color provides a vivid contrast against metal parts when viewed under black light in a darkened area but does not require total darkness for viewing.

MG-410 is closely controlled to assure optimum batch to batch consistency and inspection reliability and can be used with either water or oil vehicles.

Part Number and Container Size:

  • 01-0191-73: 2 lb Jar, Case of 6

Applications: Magnaglo® MG-410 is used for general purpose wet method magnetic particle inspection of inclusions, seams, cracks, tears, laps, flakes and welding defects.

MG410 Powder

Oil Vehicle

Magnaglo® Carrier II Oil

Magnaglo® Carrier II Oil is designed to promote enhanced magnetic particle mobility and suspension.

Magnaglo® Carrier II Oil is used to suspend wet (oil) method magnetic particles when water is not used as a suspension vehicle. It has virtually no odor or fluorescence. Carrier II has a flash point in excess of 200°F allowing it to meet OSHA requirements for a Class III B liquid.

Specifications Compliance: 

ASTM E-1444, ASTM E-709, Pratt & Whitney PMC 1887, A-A-59230, ASME B & PV Code, Sec. V, AMS-2641

Part Number and Container Size: 

  • 01-2122-40: 5 Gallon Pail
  • 01-2122-30: 20 Gallon Pail
  • 01-2122-45: 55 Gallon Pail

Carrier II

Water Bath Additives

Magnaglo® AX-52 Corrosion Inhibitor

Magnaglo® AX-52 Corrosion Inhibitor is an outstanding corrosion inhibitor for water base wet method magnetic particle inspection.

Magnaglo® AX-52 is a pale yellow to amber colored liquid corrosion inhibitor that mixes in and quickly dissolves in the water bath to provide excellent corrosion protection.

Part Number and Container Size:

  • 01-2190-40: 5 Gallon Pail

AZ-52

Magnaglo® WC-1 Water Conditioner

Magnaglo® WC-1 is liquid water conditioner used in wet method magnetic particle testing when water is used as the bath vehicle.

Magnaglo® WC-1 is an excellent general-purpose water conditioner that gives a water bath good surface wetting and magnetic particle dispersion capabilities. Its unique blend of wetting agents, corrosion inhibitors and anti-forming agents eliminates the need for additional water conditioning agents.

As a liquid, WC-1 is more rapidly dispersed in the water bath than powdered conditioners.

Part Number and Container Size:

  • 01-2173-40: 5 Gallon Pail

WC-1

Magnaglo® WA-2B Water Conditioner

Magnaglo® WA-2B is a white granular powder water conditioner used in wet method magnetic particle testing when water is used as the bath vehicle.

Magnaglo® WA-2B is an excellent general-purpose water conditioner that gives a water bath good surface wetting and magnetic particle dispersion capabilities. Its unique blend of wetting agents, corrosion inhibitors and anti-forming agents eliminates the need for additional water conditioning agents and will remain cake-free during prolonged storage.

Part Number and Container Size: 

  • 01-2148-63: 5 lb. Pail

WA-2B

Magnaglo® ZAF-2 Non-Silicone Anti-Foam

Magnaglo® ZAF-2 Non-Silicone Anti-Foam eliminates foaming in developer, emulsifier and magnetic particle baths. 

Magnaglo® ZAF-2 is a clear, colorless liquid that is used to eliminate forming in aqueous developer baths, water based magnetic particle baths and hydrophilic remover baths.

A few drops of ZAF-2 sprinkled around on the surface is all that is required to eliminate foaming in most baths.

Part Number and Container Size:

01-9410-20: 1 Gallon Plastic Bottle

Applications: Automobile Parts, Off-Road Equipment, Farm Equipment, Welds, Castings, Forgings, Leak Testing, Pressure Vessels, Aircraft, Marine, Construction, Maintenance, Petroleum Pipelines, Power Plant Inspections, General Metalwork.

ZAF-2 Antifoamer

Portable Inspection Kits

Magnaglo Kit

Portable MPI kit (No Yokes are included in this kit) with ZB-100F Ultraviolet Black Light and the Materials needed to perform inspection.

Part Number: 600088

Magnaglo KIT w/ZB-100F – 115V- 60 Hz

Kit Includes:

  • (1) ZB-100F – Fan-Cooled Ultraviolet Black Light
  • (2) Cans of 14 AM
  • (2) Cans of SKC-S Cleaner
  • Paint Marker
  • SCRUBS™ Hand Towels
  • Portable Carrying Case and Instructions.
  • *NOTE: No magnetizing device is supplied with this kit.*

 

Magnaglo Kit

Leave a Reply

Your email address will not be published. Required fields are marked *