Punch, return, and reset operations are fully automatic.

An emergency switch stops the punch instantly at any time.

Punch & Dies for HA & HS Series

1″ and 1-1/16″ punch requires the use of a split lock nut (UHA9936-0) and reduces the maximum thickness to 9/16″

Model HA11-1624 HA07-1624 HA06-1322
Max. Punching Diameter : 1-1/16″ Max. Punching Diameter : 15/16″ Max. Punching Diameter : 7/8″
Max. Punching Thickness : 5/8″* Max. Punching Thickness : 5/8″ Max. Punching Thickness : 1/2″
Max. Output : 49 tons Max. Output : 49 tons Max. Output : 34 tons
Max. Throat Depth 4-5/16″ 2-3/4″ 2-3/8″
Hole Making Time Punching Time 16.5 sec. Punching Time 16.5 sec. Punching Time 10.5 sec.
Returning Time 1 sec. Returning Time 1 sec. Returning Time 1 sec.
Allowable Max. Pressure 10,000 psi 10,000 psi 10,000 psi
Weight 78 lbs. 63 lbs. 47 lbs.
Accessories Included • Hose Cord Assembly • Spanner • Sub Handle Assembly • Tool Box
• 22 mm Punch & Die mounted on machine • 4mm Allen Wrench

Punch & Dies for HA & HS Series

In case of mild steel maximum punching thickness must be decided based on the equation of 0.8 x punching diameter. For details see the instruction manual.

Optional Accessories

UHA9936-0 Split Lock Nut
for 1” and 1-1/16” Punch
TA99037-0 Lock Nut Assembly
for 25 mm Punch
Part #TA96342-0
Hook Clamp Assembly


Part #TW-40
Spring Balancer for HA11/HA07
Part #TW-30
Spring Balancer for HA06
Part #TA94386-0
Foot Switch Assembly

Portable Hydraulic Pump for Selfer HA Type

Model SC-05
Power Source (Single Phase) 110-120V AC
Max. Output Pressure 10,000 psi
Output At No Load 1.28 qt/min
Output At 10,000 psi 0.59 qt/min
Motor 0.4 kw 4p
Reservoir Capacity 4.26 qt
Discharge Port Rc 3/8 (PT 3/8″)
Weight 60 lbs.
Portable Single-Acting Hydraulic Pump
(to be used with the HA Series Punches)

Leave a Reply

Your email address will not be published. Required fields are marked *