WS-4500M Portable Magnetic Drilling Machine

drillingmachine_ws4500ml

 

MADE IN TAIWAN

 

 

WS-4500M Portable Magnetic Drilling Machine

  • Brand : WS (Wind Speed)
  • Model: WS-4500M (Manual Feed)
  • Hole Capacity: 45mm (for 13-45mm cutter and up to 50mm thickness plate )
  • Motor Rated Power Consumption: 1850W ( 7.5 Ampere)
  • No-Load Speed: 650 ~ 720 rpm
  • Magnet Adhesion: 7350 N / 750 kgf
  • Magnet Dimensions: 188mm x 86mm x 56mm
  • Weight: 15kg
Features
  • Designed to use T.C.T. Broach Cutter.
  • Cuts up to diameter 45 mm and 50 mm deep.
  • Serves as two types of drilling that allows loading in a “Broach Cutter” or change with drill chuck for loading “Twist Drill or Hole Saw”.
  • Bearing Bracket aligns cutters precisely, which increases cutter and motor life. Also utilized with roller bearing for increase main shaft stability and avoid motor and shaft sway easily.
  • The roller bearing design that lowers down damage. The cutter no needs to change many times and save the cost also increase cutter life.
  • Designed with double coil magnetic base when has power the in front of coil will start. This design is for adjust to point the accuracy position on work sheet. When any one coil burning that still keeps another and avoid danger. It’s high safety.
  • Designed with electronic switch that can adjust an electric current and keep the voltage. The stability will higher than traditional switch.
  • Light weight, only 15 Kg.

 

Spesifications
Model WS-4500M
Voltage (Single Phase) 220 ~ 240V AC 50 / 60 Hz
Motor Power Consumption 1850 W
No-load Speed 650 ~ 720 rpm
Tool Adaptor Inner Diameter 19 mm
Adjustable in height for max. stroke 100 mm
Magnet Power Consumption via Tool Holder
Magnet Adhesion 38 W
Magnet Dimensions 188 mm x 86 mm x 56 mm
Weight 15 kg
T.C.T. Broach Cutter Hole Diameter Plate Thickness
18-45 mm 9-50 mm
Twist Drill 1-13 mm

 

 

 

 

 

 

Leave a Reply

Your email address will not be published. Required fields are marked *